Hongrui Pneumatic sander polishing dust removal equipment Model: HR204A
1, Start/shut off the vacuum by manual, equipped with hand sander.
2, Start/shut off the vacuum by pneumatic sander, save energy and cost.
3, The vacuum is of the function of adjusting the suction, easy to be used with hand sander, also to be used with other model sanders. Adjustable suction can protect the overload of motor of vacuum, save electricity.
4, Pneumatic sander control the vacuum: Automatically delay 10-15 sec to turn off the vacuum, adjust the suction freely, perfect sanding effect, prevent the dust blow into the sander bearing, so that ensure the long use life.
< Reduce sanding cost, enhance operating effect.
< Ensure coating quality, save energy.
< Improve workshop environment and health security
Use the adjustable suction vacuum Equipped with hand sanding board, can save 35% above power. Reduce carbon dioxide emissions will reward you the content profit.
Technical specification of vacuum:
Voltage: 220V
Power: 1600-2100W
Vacuum flow: 110L/S:
Capacity: 70L
Hose length: 5M
Shutoff delay: 10-15S
Vacuum force size: Regulate freely
Hongrui Dust cleaning and grinding machine
|
6"Two-Hand Sander
|
6"Gear-Driven Sander
|
|
Pad Size:6"/150mm
Pad holes: 15
Free Speed:12000rpm
Orbit Diamerer:10mm
Air cons.:100L/Min
Weight Lbs:1kg
|
Pad Size:6"/150mm
Pad holes: 15
Free Speed:900rpm
Orbit Diamerer:5mm
Air cons.:100L/Min
Length:280mm
Weight Lbs:1.9kg
|
Basic Equipped Parts:
> Mobile electronic vacuum: 1PC
Adjustable suction, time-delay shut off the Electronic vacuum.
> 6"Random Orbital Paim Sander For Rough surface grinding : 1PC
> 6"Gear-Driven Sander For Strong grinding machine : 1PC
> Manual grinding plate: 1PC
> 5M Pneumatic sander Vacuum tube : 2PC
> Sander Sandpaper: 100PC
> Manual grinding plate sandpaper: 10PC
